- PUBLICATIONS BY MILLER ENGINEERING
- A list of the publications by present and previous Miller
Engineering staff. Many of these were initiated as Miller Engineering
projects.
- Click link to move to topic.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
- Books, Book Chapters and DissertationsTopic
- Product Warnings, Labels and
Instructions
- Warnings Effectiveness
- Product Packaging and Instruction Communication
- Warnings Design and Modeling
- Product Labels and Instructions
- Books and Dissertations on Warnings
- Safety Analysis
- Accident Reconstruction & Modeling
- Fire Science and Flammable Vapor Ignitions
- Child and Infant Safety
- Household Products: Appliance, Tool, Furniture & Chemical
- Safety Methodologies & Knowledge Engineering
- Vehicle Operator Analysis
- All Terrain Vehicles (ATV's)
- Automobile Transporter Accidents
- Climbing Systems
- Disabled Drivers
- Drivers Training and Expectancy
- Visibility Research
- Alcohol and Other Stressors
- Vehicle Safety
- Automobiles
- Commercial and Industrial Vehicles
- Trucks and Buses
- Aircraft
- Boating and Marine Applications
- Boating Accidents
- Boat Occupant Protection
- Boat Operator Performance
- Boat Operator Visibility
- Diving
- Occupational Safety and Health
- Occupational Engineering
- OSHA Standards
- Chemical/Toxic Exposures & MSDS
- Workers Compensation
- Work Measurement
- Mechanical Design
- Safety of Automated Machines and Robotics
- Climbing Systems and Fall Prevention
- Slip Resistance
- Falls from Vehicles
- Coefficient of Friction
- Human Factors and Ergonomics
- General Human Factors
- Decision Making
- Stressors
- Manufacturing Processes and Job
Design
- Work Measurement and Methods Engineering
- Accommodation for Disabled Workers and Operators
- Energy
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Books, Book Chapters and
Dissertations
- Lehto, M.R. and Miller, J.M. (1986). Warnings: Volume 1:
Fundamentals, Design and Evaluation Methodologies, Ann Arbor,
MI: Fuller Technical Publishing.
- Miller, J.M., Lehto, M.R. and Frantz, J.P. (November, 1994).
Warnings and Safety Instructions: Annotated and Indexed, Ann
Arbor, MI: Fuller Technical Publications.
- Miller, J.M., Lehto, M.R. and Frantz, J.P. (1990). Instructions
and Warnings: The Annotated Bibliography, Ann Arbor, MI: Fuller
Technical Publications.
- Clark, D.R. (1988). Model for the Analysis, Representation
and Synthesis of Hazard Warning Communications (Ph.D. dissertation),
University of Michigan.
- Miller, J.M. and Lehto, M.R. (1987). Warnings: Volume 2:
An Annotated Bibliography, Ann Arbor, MI: Fuller Technical Publishing.
- Miller, J.M. (1982). "The Management of Occupational
Engineering," Handbook of Industrial Engineering, John Wiley.
- Lehto, M.R., with Weiss, S.W., Boggs, G., Shodja, S. and
Martin, D.J., "Computer System Response Time and Psychophysiological
Stress II," Proceedings of the Human Factors Society - 26th
Annual Meeting, Seattle, WA, October 25-29, 1982, pp. 698-702.
- Foley, J.P. and Lehto, M.R., "Models of Memory: Implications
for Knowledge Acquisition," in Designing and Using Human-Computer
Interfaces and Knowledge Based Systems, Salvendy, G. and Smith,
M.J. (eds), Elsevier, Amsterdam, 1989, pp. 813-821.
- Lehto, M.R. and Clark, D.R., "Warning Signs and Labels
in the Workplace," in Workspace, Equipment and Tool Design,
Karwowski, W. and Mital, A. (eds), Elsevier, Amsterdam, 1990,
pp. 303-344.
- Lehto, M.R., Boose, J., Sharit, J. and Salvendy, G. "Knowledge
Acquisition," Chapter 58 in Handbook of Industrial Engineering,
second edition, Salvendy, G. (ed), John Wiley, NY, 1992, pp.
1495-1545.
- Lehto, M.R. and Foley, J.P., "Physical Aspects of Car
Design: Occupant Protection," Chapter 7 in Automotive Ergonomics,
Peacock, B. and Karwowski, W. (eds), Taylor and Francis, 1993,
pp. 141-160.
- Lehto, M.R., Zhu, W. and Carpenter, B., "The Relative
Effectiveness of Hypertext and Text," in Human-Computer
Interaction: Software and Hardware Interfaces, Salvendy, G. and
Smith, M.J. (eds), Elsevier, Amsterdam, 1993, pp. 181-186.
- Lehto, M.R., "Decision Making" Chapter 37 in Handbook
of Human Factors & Ergonomics, second edition Salvendy, G.
(ed), John Wiley & Sons, NY, 1997, pp. TBA.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Product Warnings, Labels
and Instructions
Warnings Effectiveness
- Lehto, M.R. and Papastavrou, J., "Models of the Warning
Process: Important Implications Towards Effectiveness,"
Safety Science, 1993, Vol. 16, pp. 569-595.
- Lehto, M.R. (1992). "History of Warnings Effectiveness,"
Presented at the University of Michigan Engineering Summer Conference,
Ann Arbor, MI. Course: Warnings, Labels and Product Packaging:
Design and Compliance.
- Lehto, M.R. and Miller, J.M. (1988). "The Effectiveness
of Product Warning Labels," Journal of Products Liability,
Vol. II, pp. 225-270.
- Miller, J.M. with Frantz, J.P. and Lehto, M.R. (1991). "Must
the Context be Considered When Applying Generic Safety Symbols?:
A Case Study in Flammable Contact Adhesives," Journal of
Safety Research, 22, pp. 147-161.
- Lehto, M.R. and Miller, J.M. (1988). "The Effectiveness
of Warning Labels," Personal Injury Review 1988, New York:
Matthew Bender Press.
- Miller, J.M. with Frantz, J.P. (1993). "Communicating
a Safety-Critical Limitation of an Infant Carrying Product: The
Effect of Product Design and Warning Salience," International
Journal of Industrial Ergonomics, Vol. 11, pp. 1-12.
- Miller, J.M., with Frantz, J.P. and Main, B.W. (1993). "The
Ability of Two Lay Groups to Judge Product Warning Effectiveness,"
Proceedings of the Human Factors and Ergonomics Society Annual
Meeting, Santa Monica, CA. pp. 989-993.
- Miller, J.M. with Frantz, J.P. (1992). "The Effect of
Product Design and Warning Salience on the Perception of Safety-Critical
Product Attributes: A Case Study in Infant Carriers," S.
Kumar (Ed.), Advances in Industrial Ergonomics & Safety IV
pp. 569-576. London: Taylor & Francis.
- Lehto, M.R. and Salvendy, G., "Warnings: A Supplement
not a Substitute for Other Approaches to Safety," Ergonomics,
1995, Vol. 38, No. 11, pp. 2155-2163.
- Lehto, M.R. and Papastavrou, J., "Improving the Effectiveness
of Warnings by Increasing the Appropriateness of Their Information
Content: Some Hypotheses about Human Compliance," Safety
Science, 1996, Vol. 21, pp. 175-189.
- Lehto, M.R., Simulation in the Evaluation of Warnings and
Safety Instructions, Invited Lecture, Simulation for Safety at
Work, an educational workshop organized by the Nordic Institute
for Advanced Training in Occupational Health (NIVA), Turku, Finland,
June 12-16, 1989.
- Lehto, M.R., Safety Decision-Making: Two Case Studies, University
of Western Australia, Western Australia, September, 1993.
Product Labels, Packaging and Instruction Communication
- Miller, J.M. (1992). "Introduction to Product Information
Methods," Presented at the University of Michigan Engineering
Summer Conference, Ann Arbor, MI. Course: Warnings, Labels and
Product Packaging: Design and Compliance.
- Miller, J.M., Frantz, J.P. and Rhoades, T.P. (1991), "A
Model for Developing and Evaluating Product Information,"
Proceedings of the Human Factors Society 35th Annual Meeting
pp. 1063-1067, Santa Monica, CA: Human Factors Society.
- Miller, J.M. with Rhoades, T.P., Frantz, J.P. (1990). "Emerging
Methodologies for the Assessment of Safety Related Product Communications,"
Proceedings of the Human Factors Society 34th Annual Meeting,
pp. 998-1002, Santa Monica, CA: Human Factors Society.
- Clark, D.R. (1993, 1992). Warnings, Labels and Product Packaging,
Continuing Engineering Education, University of Michigan, Ann
Arbor, July 21-23, 1993 and July 15-17, 1992.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Warnings Design and Modeling
- Lehto, M.R. (1992). Cognitive Guidelines for Warnings Design,
Presented at the University of Michigan Engineering Summer Conference,
Ann Arbor, MI. Course: Warnings, Labels and Product Packaging:
Design and Compliance.
- Lehto, M.R. (1992), "Designing Warning Signs and Warning
Labels: Part I-Guidelines for the Practitioner," International
Journal of Industrial Ergonomics, Vol. 10, pp. 105-113.
- Lehto, M.R. (1992), "Designing Warning Signs and Warning
Labels: Part II-Scientific Basis for Initial Guidelines,"
International Journal of Industrial Ergonomics, Vol 10, pp. 115-138.
- Lehto, M.R. (1992). Using Hypertext for Providing Warnings
Information, Presented at the University of Michigan Engineering
Summer Conference, Ann Arbor, MI. Course: Warnings, Labels and
Product Packaging: Design and Compliance.
- Miller, J.M. (1992). "ANSI Manual Guidelines."
Presented at the University of Michigan Engineering Summer Conference,
Ann Arbor, MI. Course: Warnings, Labels and Product Packaging:
Design and Compliance.
- Miller, J.M. (1992). "Canadian/European Warnings Development,"
Presented at the University of Michigan Engineering Summer Conference,
Ann Arbor, MI. Course: Warnings, Labels and Product Packaging:
Design and Compliance.
- Lehto, M.R. (1991). "A Proposed Conceptual Model of
Human Behavior and its Implications for the Design of Product
Warnings," Perceptual and Motor Skills, Vol. 73, pp. 595-611.
- Lehto, M.R. (1991). "Designing Warning Signs and Labels,"
First International Invited Symposium on Ergonomic Guidelines
and Problem Solving, Kilbom, A. and Mital, A. (co-organizers),
Lake Tahoe, NV, June 10-11.
- Lehto, M.R. and Papastavrou, J.D. (1990). "A Distributed
Signal Detection Theory Model: Implications to the Design of
Warnings," Proceedings of the 1991 Automatic Control Conference,
Boston, MA, pp. 2586-2590.
- Lehto, M.R. (1989). Simulation in the Evaluation of Warnings
and Safety Instructions, Invited Lecture, Simulation for Safety
at Work, an educational workshop organized by the Nordic Institute
for Advanced Training in Occupational Health (NIVA), Turku, Finland,
June 12-16.
- Clark, D.R. (1988). Model for the Analysis, Representation
and Synthesis of Hazard Warning Communications (Ph.D. dissertation),
University of Michigan.
- Miller, J.M. and Lehto, M.R. (1987, October). "Predicting
Warnings-Induced Behavior Changes," Proceedings of the 31st
Annual Human Factors Society Meeting, New York.
- Lehto, M.R., "Designing Warning Signs and Labels: A
Theoretical/Scientific Framework" Journal of Consumer Safety,
in press, 24 p.
- Lehto, M.R., Designing Warning Signs and Labels, Invited
Lecture, Dow Chemical Co., Midland, MI, November 1, 1991.
- Lehto, M.R., Warnings and Informed Choice: A Decision-Analytic
View, Invited Lecture, Association of American Law Schools Annual
Meeting, San Antonio, TX, January 3-7, 1992.
- Lehto, M.R., Designing Warnings: A Theoretical/Scientific
Framework, invited presentation, European Consumer Safety Association
(ECOSA) Safety Labeling Conference, Paris, France, November 9-10,
1995.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Books and Dissertations on Warnings
- Lehto, M.R. and Miller, J.M. (1986). Warnings: Volume 1:
Fundamentals, Design and Evaluation Methodologies, Ann Arbor,
MI: Fuller Technical Publishing.
- Miller, J.M., Lehto, M.R. and Frantz, J.P. (November, 1994).
Warnings and Safety Instructions: Annotated and Indexed, Ann
Arbor, MI: Fuller Technical Publications.
- Miller, J.M., Lehto, M.R. and Frantz, J.P. (1990). Instructions
and Warnings: The Annotated Bibliography, Ann Arbor, MI: Fuller
Technical Publications.
- Clark, D.R. (1988). Model for the Analysis, Representation
and Synthesis of Hazard Warning Communications (Ph.D. dissertation),
University of Michigan.
- Miller, J.M. and Lehto, M.R. (1987). Warnings: Volume 2:
An Annotated Bibliography, Ann Arbor, MI: Fuller Technical Publishing.
- Miller, J.M. (1965). Capacity Concept for Improved Production
Management Decision Making. Copyrighted Masters Thesis, Ohio
State University, Columbus, OH.
- Weiss, S.W., Boggs, G., Lehto, M.R., Shodja, S. and Martin,
D.J., "Computer System Response Time and Psychophysiological
Stress II," Proceedings of the Human Factors Society - 26th
Annual Meeting, Seattle, WA, October 25-29, 1982, pp. 698-702.
- Boggs, G.J., Weiss, S.W., Lehto, M.R. and Salvendy, G., "Computer
System Response Time and Psychophysical Stress," IEEE Conference
on Systems, Man and Cybernetics, Seattle, WA, October 28-30,
1982, pp. 40-44.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Safety Analysis
Accident Reconstruction
- Lehto, M.R. and Salvendy, G. (1991). Models of Accident Causation
and Their Application: Review and Reappraisal, Journal of Engineering
and Technology Management, Vol 8, pp. 173-205.
- Main, B.W. and Knopf, E. (1995). A New Application of Camera
Reverse Projection in Reconstructing Old Accidents. SAE Technical
Series Paper #950357. Presented at the Society of Automotive
Engineers International Congress and Exposition, Detroit, MI,
Feb 27 - Mar 2.
- Main, B.W. with Frantz, J.P. (1992, December). Accident Investigation,
Analysis, & Prevention. Presented at the University of Michigan
Law School, Ann Arbor, MI.
Fire Science and Flammable Vapor Explosions
- Miller, J.M. with Frantz, J.P. and Lehto, M.R. (1991). Must
the Context be Considered When Applying Generic Safety Symbols?:
A Case Study in Flammable Contact Adhesives. Journal of Safety
Research, 22, 147-161.
- Main, B.W., Frantz, J.P., and Rhoades, T.P. (1993). Do Consumers
Understand the Difference Between 'Flammable' and 'Combustible'
? Ergonomics in Design, July.
- Main, B.W., Rhoades, T.P., and Frantz, J.P. (1992). Conveying
Flammability Hazards & Precautions to Lay Users: An Examination
of Current Labeling Systems. NFPA Journal, Volume 88, No. 1,
January/February.
Child and Infant Safety
- Miller, J.M. with Frantz, J.P. (1993). "Communicating
a Safety-Critical Limitation of an Infant Carrying Product: The
Effect of Product Design and Warning Salience," International
Journal of Industrial Ergonomics, Vol 11, pp. 1-12.
- Miller, J.M. with Frantz, J.P. (1992). "The Effect of
Product Design and Warning Salience on the Perception of Safety-Critical
Product Attributes: A Case Study in Infant Carriers," In
S. Kumar (Ed.), Advances in Industrial Ergonomics & Safety
IV p. 569-576. London: Taylor & Francis.
- Lehto, M.R. with Hatem, A., "The Effectiveness of Glue
Odor as a Warning Signal," Ergonomics, 1995, Vol. 38, No.
11, pp. 2250-2261.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Household Products: Appliance, Tool, Furniture and Chemicals
- Miller, J.M. with Rhoades, T.P. (1987). "Towards the
Development of a Consensual Design Standard for Casual Furniture
Chairs," Proceedings of Interface 87, Fifth Symposium on
Human Factors and Industrial Design in Consumer Products, Santa
Monica, CA: Human Factors Society.
- Lehto, M.R. with Haro, E., Giffen and W., Papastavrou, J.,
"Use and MisUse of
- Smoke Detectors in Residential Areas"Perceptual and
Motor Skills, 1996, Vol. 82, pp. 1211-1222.
- Lehto, M.R., A Conceptual Approach to Consumer Product Safety,
Technical Report, The University of Michigan, Ann Arbor, MI,
1983.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Safety Methodologies and Knowledge Engineering
- Lehto, M.R. with Naruo, N. and Salvendy, G., "Development
of a Knowledge-Based Decision Support System for Diagnosing Malfunctions
of Advanced Production Equipment," International Journal
of Production Research, 1990, Vol. 28, No. 12, pp. 2259-2276.
- Lehto, M.R. and Miller, J.M. (1987). "Scientific Knowledge
Acquisition During the Extension of GSA: An Expert System for
Generic Safety Analysis," International Journal of Industrial
Ergonomics, Vol II (Fall), 61-75.
- Clark, D.R. with Jones, R.C. (1987). "Injury Control
and Engineering Education," Symposium on Motor Vehicle Injuries,
The New York Academy of Medicine, New York, NY, December 7-8.
- Miller, J.M. and Lehto, M.R. (1985). "An Experimental
Application of Knowledge Engineering: A Generic Safety Analysis
System." Proceedings of the IEEE International Conference
on Systems, Man and Cybernetics.
- Lehto, M.R., Clark, D.R. and Miller, J.M. (1984)." An
Isomorphism Between Fault Tree Analysis and LISP Data Structures."
Proceedings of the First USA-Japan Conference on Human- Computer
Interaction.
- Lehto, M.R., Zhu, W. and Carpenter, B. (1993). "The
Relative Effectiveness of Hypertext and Text," Human-Computer
Interaction: Software and Hardware Interfaces, Salvendy, G. and
Smith, M.J. (eds.), Elsevier, Amsterdam, pp. 181-186.
- Lehto, M.R. with Foley, J.P. (1989). "Models of Memory:
Implications for Knowledge Acquisition," Designing and Using
Human-Computer Interfaces and Knowledge Based Systems, Salvendy,
G. and Smith, M.J. (eds.), Elsevier, Amsterdam, pp. 813-821.
- Lehto, M.R. (1986 November). Modeling Techniques in Human
ComputerInteraction, NEC short course, Purdue University, West
Lafayette, IN.
- Lehto, M.R. with Cho, S., "A Fuzzy Scheme with Application
to Expert Classification Systems for Computing the Degree of
Match Between a Rule and an Assertion," Cybernetics and
Systems: An International Journal, 1992, Vol. 23, No. 1, pp.
1-27.
- Lehto, M.R with Cho, S., Ersoy, O., "An Algorithm to
Compute the Degree of Match in Fuzzy Systems," Fuzzy Sets
and Systems, 1992, Vol. 49, No. 3, pp. 285-299.
- Lehto, M.R. with Cho, S., Ersoy, O., "Parallel, Self-Organizing,
Hierarchical Neural Networks with Competitive Learning and Safe
Rejection Schemes," IEEE Transactions on Circuits and Systems
II: Analog and Digital Signal Processing, 1993, Vol. 40, No.
9, pp. 556-567.
- Lehto, M.R., Zhu, W. and Carpenter, B., "The Relative
Effectiveness of Hypertext and Text," International Journal
of Human-Computer Interaction, 1995, Vol. 7, No. 4., pp. 293-313.
- Lehto, M.R. with Moustakis, V. and Salvendy, G., "Survey
of Expert Opinion: Which Machine Learning Method May Be Used
For Which Task?," International Journal of Human-Computer
Interaction, 1996, Vol. 8, No. 3, pp. 221-236.
- Lehto, M.R., Clark, D.R. and Miller, J.M., "An Isomorphism
Between Fault Tree Analysis and LISP Data Structures," in
Proceedings of the First U.S.A. Japan Conference on HumanComputer
Interaction, Salvendy, G. (ed), Honolulu, Hawaii, 1984, pp. 297-300.
- Lehto, M.R. and Miller, J.M., "An Experimental Application
of Knowledge Engineering: A Generic Safety Analysis System,"
IEEE Conference on Systems, Man and Cybernetics, Tucson, AZ,
November 12-15, 1985, pp. 131-135.
- Lehto, M.R. and Zhu, W., "Provision of Reference Materials
to Designers via Hypertext," Proceedings of the 18th Annual
NSF Grantees Conference on Design and Manufacturing Systems Research,
Atlanta, GA, January 8-10, 1992, pp. 727-730.
- Lehto, M.R. and Zhu, W., "A Computer Hypertext System
for Providing Safety-Related Information," International
Conference on Computer-Aided Ergonomics and Safety, Tampere,
Finland, May 18-20, 1992, pp. 307-314.
- Lehto, M.R. with Cho, S., "Development of a Conceptual
Model for Combining Fuzzy and Nonfuzzy Inference Schemes,"
International Fuzzy Systems and Intelligent Control Conference,
Louisville, KY, March 15-18, 1992, pp. 147-155.
- Lehto, M.R. with Cho, S., "The Automatic Construction
of the Knowledge Base for Fuzzy Systems from Data," International
Fuzzy Systems and Intelligent Control Conference, Louisville,
KY, March 15-18, 1992, pp. 141-146.
- Lehto, M.R., "Knowledge-based Approach for Assisting
Safety/Human Factors Design," Proceedings of the 1994 NSF
Design and Manufacturing Grantees Conference, Cambridge, MA,
January 5-7, 1994, pp. 61-62.
- Lehto, M.R., Zhu, W. and Carpenter, B., "The Relative
Effectiveness of Hypertext and Text," in Human-Computer
Interaction: Software and Hardware Interfaces, Salvendy, G. and
Smith, M.J. (eds), Elsevier, Amsterdam, 1993, pp. 181-186.
- Lehto, M.R., Boose, J., Sharit, J. and Salvendy, G. "Knowledge
Acquisition," Chapter 58 in Handbook of Industrial Engineering,
second edition, Salvendy, G. (ed), John Wiley, NY, 1992, pp.
1495-1545.
- Lehto, M.R., A Structured Methodology for Expert System Development
with Application to Safety Ergonomics, Ph.D. Thesis, The University
of Michigan, Ann Arbor, MI, 1985.
- Lehto, M.R., A Generic Safety Analysis System Involving Use
of Artificial Intelligence, Invited Lecture, Simulation for Safety
at Work, an educational workshop organized by the Nordic Institute
for Advanced Training in Occupational Health (NIVA), Turku, Finland,
June 12-16, 1989.
- Lehto, M.R., The Relative Effectiveness of Hyper Text and
Text in Reading-to-do Tasks, NEC International Conference, NEC
Corporation, Tokyo, Japan, October, 1991.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Vehicle Operator Analysis
All-Terrain Vehicles
- Lehto, M.R. and Foley, J.P. (1991). Risk-Taking, Warning
Labels, Training, and Regulation: Are They Associated with the
Use of Helmets by All-Terrain Vehicle Riders?, Journal of Safety
Research, Vol. 22, No. 4, pp. 191-200.
- Lehto, M.R. with Foley, J.P. (1990). The Effect of Law and
Training on All-Terrain Vehicles Riders' Safety-Related Behaviors,
Proceedings of the Human Factors Society-34th Annual Meeting,
Orlando, FL, pp. 966-969.
- Lehto, M.R. and Foley, J.P. (1989). The Influence of Regulation,
Training, and Product Information on ATV Operator Behavior: A
Field Study, Interface '89, Carnegie Mellon University, Pittsburgh,
PA, May 22-24, pp. 107-113.
Automobile Transporter Accidents
- Miller, J.M. and Anderson, K. 1979, March). Tabulation of
Results for a Survey of Automobile Transporter Driver Loading/Unloading
Accidents. Department of Industrial and Operations Engineering,
University of Michigan, Ann Arbor, MI.
Climbing Systems
- Miller, J.M. with Rhoades, T.P. (1992). Methods Used On Atypical
Climbing Systems, In S. Kumar (Ed.), Advances in Industrial Ergonomics
and Safety IV, London: Taylor & Francis.
Disabled Drivers
- Miller, J.M., Boydstun, L., and Kochlar, D. (1981). An Approach
to Training the Disabled Driver. IEEE International Conference
on Systems, Man and Cybernetics.
- Miller, J.M., Boydstun, L., and Kochlar, D. (1981). Simulator
Based Evaluation of Perceptually Disabled Drivers. IEEE Transactions
on Systems, Man and Cybernetics.
- Miller, J.M. with Boydstun, L. E., Kessel, D. S., (1980).
Assessment of Perceptually Disabled Individual's Driving Skills
with a Driving Simulator. In Proceedings of the Human Factors
Society 24th Annual Meeting (pp. 111-113). Santa Monica, CA:
Human Factors Society.
Driver Training and Expectancy
- Miller, J.M. with Main, B.W. and Rhoades, T.P. (1991). Driver
Expectancy as a Potential Traffic Control Criteria at Rural State
Highway Intersections (Technical Report).
- Miller, J.M., Boydstun, and L. E. et al. (1979). Digital
Simulation Techniques for Drivers Training and Skill Evaluation.
In Proceedings of the Interagency Conference on Rehabilitation
Engineering, Atlanta.
Visibility Research
- Miller, J.M., Boydstun, L. E., Kessel, D. S. and Hensen,
D. (1980). Driver's Training Program: A Methodology for Determining
the Training Needs of Individuals with Perceptual Disabilities.
In Proceedings of the 1980 International Conference On Rehabilitation
Engineering, Toronto.
- Miller, J.M. with Gatchell, S.M. (1974). Prediction of Drivers'
Eye Location. In Proceedings of the Human Factors Society 18th
Annual Meeting (pp. 189-191). Santa Monica, CA: Human Factors
Society.
- Miller, J.M. and Gatchell, S.M. (1974). Visibility Pilot
Research (Phase I) (Final Subcommittee Report, SAE VRI 13.1,
Vol. II).
Alcohol and Other Stressors
- Lehto, M.R., James, D.W. and Foley, J.P., "Exploratory
Factor Analysis of Adolescent Attitudes toward Alcohol and Risk,"
Journal of Safety Research, 1994, Vol. 25, No. 4, pp. 197-213.
- Lehto, M.R. with Weiss, S.W., Boggs, G., , Shodja, S. and
Martin, D.J., "Computer System Response Time and Psychophysiological
Stress II," Proceedings of the Human Factors Society - 26th
Annual Meeting, Seattle, WA, October 25-29, 1982, pp. 698-702.
- Lehto, M.R., James, D.S. and Foley, J.P., Decision-Making
Model of Alcohol Related Behavior: An Exploratory Factor Analysis
of Adolescent Attitudes toward Alcohol and Risk, prepared for
the National Institute of Alcohol Abuse and Alcoholism Department
of Health and Human Services, U.S. Public Health Service, Alcohol,
Drug Abuse and Mental Health Administration, Washington, D.C.,
1992.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Vehicle Safety
Automobiles
- Lehto, M.R. and Foley, J.P. (1993). "Physical Aspects
of Car Design: Occupant Protection," Automotive Ergonomics,
Chapter 7, Peacock, B. and Karwowski, W. (eds.), Taylor and Francis,
pp. 141-160.
- Clark, D.R. with Ethington, E.M. and Streelman, G.A. (1989).
"What Information Does an Operator Expect in an Automobile
Display?" Automotive Information Systems and Electronic
Displays: Recent Developments, SP-770, Warrendale, PA: Society
of Automotive Engineers, p. 51-54.
- Lehto, M.R. (1988). An Interdisciplinary Scheme for the Design
and Evaluation of Automotive Passive Restraint Systems, Phase
II, Final Report presented to General Motors.
- Miller, J.M. and Pollock, S. (1977, February). Analysis of
Automobile Emissions Laboratory Operations, Final Report to U.S.
Environmental Protection Agency.
- Sorock, G., Ranney, T. and Lehto, M.R., "Motor Vehicle
Crashes in Roadway Construction Workzones: An Analysis Using
Narrative Text From Insurance Claims," Accident Analysis
and Prevention, 1996, Vol. 28, No. 1, pp. 131-138
- Lehto, M.R. and James, D., "Safety Knowledge of Users
and Non-users of the Lap Belt on 2-Point Motorized Belt Systems,"
working paper.
- Lehto, M.R. and Foley, J.P., "Design and Development
of a Concealed Air Belt System for Protection of Automobile Occupants,"
working paper.
- Lehto, M.R. and Sorock, G., "Machine Learning of Motor
Vehicle Accident Categories from Narrative Data," Methods
of Information in Medicine, 1996, Vol. 35, No. 4, pp. 1-8.
- Lehto, M.R. and Foley, J.P., "Physical Aspects of Car
Design: Occupant Protection," Chapter 7 in Automotive Ergonomics,
Peacock, B. and Karwowski, W. (eds), Taylor and Francis, 1993,
pp. 141-160.
- Lehto, M.R., An Interdisciplinary Scheme for the Design &
Evaluation of Automotive Passive Restraint Systems, Technical
Report presented to General Motors and the American Society for
Engineering Education, 1987.
- Sorock, G., Ranney, T. and Lehto, M.R., A Descriptive Study
of Motor Vehicle Crashes in Roadway Construction Workzones, American
Public Health Association, Injury Control and Emergency Health
Services Session, Washington, D.C., November 3, 1994.
- Lehto, M.R. and Sorock, G.S., Bayesian Classification of
Motor Vehicle Accidents from Accident Text, Institute for Operations
Research and Management Science (INFORMS) Conference, New Orleans,
LA, October 29-November 1, 1995.
- Lehto, M.R., Sorock, G.S. and Chatterjee, S., Classification
of Accidents and Pre-Crash Activity from Accident Narratives,
1st International Conference on Applied Ergonomics, Istanbul,
Turkey, May 21-24, 1996.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Commercial and Industrial Vehicles
- Miller, J.M. (1972). Commercial Vehicle Occupational Health
Hazards (SAE #720264). Society of Automotive Engineers.
- Miller, J.M. (1978, August). Appropriateness of Standards
for Commercial Vehicle Cab Interior Design. Response to a Federal
Register Docket, submitted to U.S. Department of Transportation
on behalf of the International Brotherhood of Teamsters.
Trucks and Buses
- Miller, J.M. with Rhoades, T.P. (1990). Revisions of TMC
Recommended Practice RP-404 'Truck and Truck Tractor Access Systems'.
1989 SAE Transactions: Journal of Commercial Vehicles, 98 (2).
- Miller, J.M. with Rhoades, T.P. (1989). Revisions of TMC
Recommended Practice RP-404 'Truck and Truck Tractor Access Systems'.
(SAE Technical Paper Series #892523).
- Rhoades, T.P. (1988, June). Proposed Revisions of TMC RP-404.
Presented to TMC Study Groups, Tucson, AZ.
- Rhoades, T.P. (1986, June). Use of the Transportable Force
Plate Measurement System. Presented to the Heavy Truck Design
Analysis Group, Ford Motor, Co.
- Miller, J.M. (1976). Efforts To Reduce Truck and Bus Operator
Hazards. Human Factors, 18 (6), 533-5.
Aircraft
- Miller, J.M. (1973). "Visual Behavior Changes of Student
Pilots Flying Instrument Approaches." Proceedings of the
Human Factors Society 17th Annual Meeting pp. 208-214, Santa
Monica, CA: Human Factors Society.
- Miller, J.M. and Foulke, J. (1973). Instruction Manual for
the Visual Activity Monitor, Contract #F33615-73-C-0232, Wright-Patterson
Air Force Base, OH.
- Miller, J.M. (1971). Student Visual and Control Behavior
in the Real Aircraft Instrument Landing Task., Copyrighted doctoral
dissertation, Ohio State University, Columbus, OH.
- Miller, J.M. and Weislogel, S. (1970). Study to Determine
the Operational Profile and Mission of the Certificated Instrument
Rated Private and Commercial Pilot (FAA-RD-70-51).
- Lehto, M.R. with Salvendy, G., Buck, J.R., Knight, J.L. and
Weiss, S.W., The Development of a Model for Aircraft Mishap Reduction:
Part 1: Literature Review, Human Factors Program, School of Industrial
Engineering, Purdue University, West Lafayette, IN, 1981.
- Lehto, M.R. with Salvendy, G. and Hwang, S.L., The Development
of a Model for Aircraft Mishap Reduction: Part II: A Methodological
Approach for Evaluating the Effectiveness of Models, Human Factors
Program, School of Industrial Engineering, Purdue University,
West Lafayette, IN, 1981.
- Lehto, M.R. with Buck, J.R., Barany, J.W., , Ings, D.M.,
Payne, D.R., Nixon, R.D. and Grosse, W.H., Development of a Methodology
for Assessing Aircrew Workloads, Human Factors Program, School
of Industrial Engineering, Purdue University, West Lafayette,
IN, 1981.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Boating and Marine Applications
Boating Accidents
- Miller, J.M., Main, B.W., Iqball, C.S. and Grieser, B.C.
(1994). Occupant Protection in Recreational Boating, Final Report
to U.S. Coast Guard, September.
- Main, B.W. (1995). Towards Reconstructing Minimum Speeds
in Recreational Boating Accidents, SAE Technical Series Paper
#950732. Presented at the Society of Automotive Engineers International
Congress and Exposition, Detroit, MI, Feb 27 - Mar 2.
- Miller, J.M. (1974). Identifying Human Factors Causes from
Boating Accident Data. In Proceedings of the Human Factors Society
18th Annual Meeting (pp. 86-91). Santa Monica, CA: Human Factors
Society.
Boat Occupant Protection
- Miller, J.M., Grieser, B.C. (August 1998). "Bowrider
Backrest Height Variables: An Experimental and Simulation Study,
Part II" Occupant Protection Phase III, Final Report to
U.S. Coast Guard.
- Miller, J.M., Grieser, B.C. (July 1998). "Boat Handhold
Placement" Occupant Protection Phase III, Final Report to
U.S. Coast Guard.
- Miller, J.M., Grieser, B.C. (June 1998). "Boat Boarding
Ladder Placement" Occupant Protection Phase III, Final Report
to U.S. Coast Guard.
- Miller, J.M., Grieser, B.C., Clark, D.R. ( April 1996). "Designs
of Boat Handholds and Boarding Ladders: Principles and Examples,"
DOTCG Grant No. 130202, NTIS PB96 195839XSP, Final Report to
U.S. Coast Guard.
- Miller, J.M., Grieser, B.C., Clark, D.R. (February 1996).
"Bowrider Backrest Height Variables: An Experimental and
Simulation Study," DOTCG Grant No. 130202, NTIS PB96 195839XSP,
Final Report to U.S. Coast Guard.
- Miller, J.M., Grieser, B.C., Clark, D.R. (February 1996 ).
"Experimental Determination of Lateral Boat Accelerations
During Turns at Bow Seat Versus Stern Seat Locations," DOTCG
Grant No. 130202, NTIS PB96 195839XSP, Final Report to U.S. Coast
Guard.
- Miller, J.M., Main, B.W., Iqball, C.S. and Grieser, B.C.
(September 1994). "Occupant Protection in Recreational Boating,"
Final Report to U.S. Coast Guard.
- Grieser, B.C., Arends, A., Minneman, G. (April.1994). "An
Advanced... Propulsion System for a Tournament Inboard Ski Boat,"
University of Michigan, BSE Senior Design Project.
- Wiker, S.F. and Miller, J.M. (1983). Acceleration Exposures
in Forward Seating Areas of Bowrider Recreational Boats. Human
Factors, 25 (3), 319-328.
- Miller, J.M. and Haas, T. (1980). Health Standards for Workplaces
Aboard Inspected Vessels. Federal Register, 45 (29).
- Miller, J.M. (1979). Human Factors Implications for Power
Boat Design. In Proceedings of the Symposium on Power Boat Design,
Boating Industry Association, Ann Arbor, MI.
Boat Operator Performance
- Miller, J.M. with Clarke, R.M. (1974). Boating Operator Performance
Stressors. In Proceedings of the Human Factors Society 18th Annual
Meeting (pp. 512-522). Santa Monica, CA: Human Factors Society.
- Miller, J.M. and Gatchell, S. (1974). Boating Operators Maneuvering
Responses Using Hand vs. Foot Throttles. Wyle Laboratories.
- Miller, J.M. with Stiehl, C.C. (1974). Perception, Decision
Making and Skill in Relation to a Boating Operator's Performance.
In Proceedings of the Human Factors Society 18th Annual Meeting
(pp. 71-77). Santa Monica, CA: Human Factors Society.
- Miller, J.M. (1973). Human Factor Applications in Boating
Safety. (Vol. I, NTIS #AD 780-988, Vol. II, NTIS #781-205). U.S.
Coast Guard Contract.
Boat Operator Visibility
- Miller, J.M. and Gatchell, S. (1977, February). The Visual
Behavior of Recreational Boat Operators (Final Report to U.S.
Coast Guard).
- Miller, J.M. (1974). An Experiment to Test the Visual Detection
Capabilities of Boating Operators Under Representative Stressors.
Wyle Laboratories.
- Diving
- Miller, J.M. (1979). Educational/Scientific Diving (ANPR).
Federal Register, 44(161).
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Workplace (Occupational)
Safety and Health
Occupational Engineering
- Miller, J.M. (1982). The Management of Occupational Engineering.
In the Handbook of Industrial Engineering. John Wiley.
- Miller, J.M. and Haas, T. (1980). Health Standards for Workplaces
Aboard Inspected Vessels. Federal Register, 45 (29).
- Miller, J.M. (1972). Commercial Vehicle Occupational Health
Hazards (SAE #720264). Society of Automotive Engineers.
OSHA Standards
- Miller, J.M. and Barrett, T. (1980). "Memorandum of
Understanding [U.S. Coast Guard and U.S. Department of Labor
(OSHA)] : Occupational Safety and Health on Artificial Island,
Installations and other Devices on the outer Continental Shelf
of the United States." Federal Register, 45(29).
- Miller, J.M. (1980, November). "Notice of Proposed Rulemaking
for Modification to 29 CFR Part 1907, Laboratory Accreditation."
Federal Register.
- Miller, J.M. (1980, November). "Response to Advance
Notice of Proposed Rulemaking on Unregulated Hazards on the Outer
Continental Shelf." Federal Register.
- Miller, J.M. and Bingham, E. (1979). "Response to Advanced
Notice of Proposed Rule Making on Unregulated Hazards on the
Outer Continental Shelf." Federal Register, September 20,
Docket CG79-073.
- Miller, J.M. (1979, February). "Verticalization Package
of OSHA 1910/1926 Safety and Health Standards." Federal
Register.
- Miller, J.M. and Bingham, E. (1978, February). "What's
Ahead for OSHA Standards," Invited paper for the Greater
New York Safety Council and the New Jersey Chamber of Commerce,
New York.
- Miller, J.M. and Bingham, E. (1977, October). "Priorities
for Future OSHA Standards Activities." Invited paper by
the National Safety Council for the National Safety Congress,
Chicago.
Chemical/Toxic Exposures (MSDS)
- Miller, J.M., Chaffin, D., Dinman, B., Smith, R. and Zontine,
D. (1975). Psychomotor and Neuromuscular Changes in Workers Exposed
to Inorganic Mercury. Journal of the American Industrial Hygiene
Association, October.
- Miller, J.M. and Chaffin, D. (1973). Behavioral and Neurological
Evaluation of Workers Exposed to Inorganic Mercury. (NIOSH Contract
#5T01-0N00161-02).
- Miller, J.M., Chaffin, D., Dinman, B., Smith, R. and Zontine,
D. (1973). An Evaluation of the Effects of Chronic Mercury Exposures
on EMG and Psychomotor Functions (Final Report, NIOSH Contract
#5T01-0N00161-02).
- Lehto, M.R. and House, T.E., "Self-Rated Comprehension
of Hazard Communication Phrases by Chemical Workers," working
paper.
Workers Compensation
- Miller, J.M. and Herrin, G. (1978, January). Relation of
Workers Compensation Data to National OSHA Priorities. Invited
paper for the Bureau of Labor Statistics, Memphis, TN.
Work Measurement
- Miller, J.M. (1974). Work Measurement as a Tool in Teaching
Dental Students and Scheduling Simultaneous Patients. In Proceedings
of the American Institute of Industrial Engineers 25th Annual
Conference, New Orleans.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Mechanical Design
Safety of Automated Machines and Robots
- Clark, D.R. and Miller, J.M. (1984). "Existing Safety
Standards Having Applicability to Robots and the Formulation
of Specific Robotic Safety Standards," 1984 SAE Passenger
Car Meeting, Dearborn, MI, October 3.
- Clark, D.R. and Miller, J.M. (1983). A Generic Safety Standard
System for Robotic and Other Types of Automated Manufacturing
Machinery, Final Report to Center for Research in Integrated
Manufacturing (CRIM), College of Engineering, University of Michigan.
- Miller, J.M. (1982). "Safety Aspects of Automated Devices,"
Management Systems Division, Center for Robotics and Integrated
Manufacturing, University of Michigan.
- Lehto, M.R. with Naruo, N., X. and Salvendy, G., "Development
of a Knowledge-Based Decision Support System for Diagnosing Malfunctions
of Advanced Production Equipment," International Journal
of Production Research, 1990, Vol. 28, No. 12, pp. 2259-2276.
- Lehto, M.R., Automated Generation of Instructions for Use
and Assembly, NEC International Conference, NEC Corporation,
Tokyo, Japan, October 20, 1992.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Climbing Systems and Fall
Prevention
Slip Resistance
- Miller, J.M., Lehto, M.R., and Rhoades, T.P. (1991). Prediction
of Slip Resistance in Climbing Systems. International Journal
of Industrial Ergonomics, 7, 287-301.
- Miller, J.M. with Rhoades. T.P. (1988). Measurement and Comparison
of 'Required' versus 'Available' Slip Resistance. In Proceedings
of the 21st Annual Meeting of the Human Factors Association of
Canada. Edmonton, Alberta, September 14-15, 1988.
- Miller, J.M., Rhoades, T.P., and Lehto, M.R. (1987). Slip
Resistance Predictions for Various Metal Step Materials, Shoe
Soles and Contaminant Conditions. (SAE Technical Paper #872288).
- Rhoades, T.P. (1986, June). Use of the Transportable Force
Plate Measurement System. Presented to the Heavy Truck Design
Analysis Group, Ford Motor, Co.
- Miller, J.M. (1983, February). 'Slippery' vs. 'Slip Resistant'
Work Surfaces: The Background for a Regulatory Definition (National
Technical Information Service Report Number NTIS #PB8 3 243634).
Falls from Vehicles
- Miller, J.M. with Rhoades, T.P. (1990). Revisions of TMC
Recommended Practice RP-404 Truck and Truck Tractor Access Systems.
1989 SAE Transactions: Journal of Commercial Vehicles, 98 (2).
- Miller, J.M. (1976). Efforts To Reduce Truck and Bus Operator
Hazards. Human Factors, 18 (6), 533-5.
Coefficient of Friction
- Miller, J.M. (1983, February). A Bibliography of Coefficient
of Friction Literature Relating to Slip Type Accidents (National
Technical Information Service Report Number NTIS #PB8 3 243626).
- Miller, J.M. (1983). Slippery Work Surfaces: Towards a Performance
Definition and Quantitative Coefficient of Friction (COF) Criteria.
Journal of Safety Research, 14 (4), 145-148.
- Miller, J.M., Chaffin, D. and Andres, R. (1983). Work Surface
Friction: Definitions, Laboratory and Field Measurements, and
a Comprehensive Bibliography.
- Miller, J.M. and Pfauth, M. (1976). Work Surface Friction
Coefficients: A Survey of Relevant Factors And Measurement Methodology.
Journal of Safety Research, June.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Human Factors and Ergonomics
Note: Most of the publications listed throughout this entire
brochure, across all topics would also be correctly classifed
as being "Human Factors, Human Factors Engineering or Ergonomics".
The articles below did not fit neatly into other more specific
categories.
General Human Factors
- Lehto, M.R. (1985). A Structured Methodology for Expert System
Development with Application to Safety Ergonomics, Ph.D. Thesis,
University of Michigan, Ann Arbor, MI.
- Lehto, M.R. (1984 September). "Ergonomic Considerations
in the Evaluation, Design and Application of Product Warnings,"
Industrial and Operations Engineering Seminar, University of
Michigan, Ann Arbor, MI, September 20.
- Miller, J.M. (1977) "A Critique of the Poulton Book:
Tracking Skill and Manual Control," Journal of Industrial
Engineering, April.
- Miller, J.M. (1974, 1973, 1972). Human Factors Implications
of Recent Government Legislation, Human Factors Engineering Summer
Conference, University of Michigan.
- Miller, J.M. and Rockwell, T.H. (1972). "The Use of
Human Subjects in Human Factors Research," Human Factors,
14(1), 35-40.
- Clark, D.R. with Lin, C.T. (1990). "A Stochastic Process
Model for Human Reliability Analysis," Advances in Industrial
Ergonomics and Safety II (Proceedings of the Annual International
Industrial Ergonomics and Safety Conference, Montreal, June 10-13),
Biman Das (Ed)., London: Taylor & Francis.
- Clark, D.R. (1989). "New Directions in Ergonomics Research,"
16th Annual Occupational Health Conference, Sponsored by the
Michigan Industrial Hygiene Society, Troy, Michigan, October
3.
- Clark, D.R. and Lehto, M.R. (1989). Expert Systems / AI Applications
in Ergonomics and Industrial Safety, Department of Industrial
Engineering, Purdue University, workshop conducted at Annual
International Industrial Ergonomics and Safety Conference '89,
Cincinnati, Ohio, June 5.
- Lehto, M.R. and Buck, J.R., "Status Reporting of "Eyes
On" and Peripheral Displays During Tracking," Perceptual
and Motor Skills, 1988, Vol. 67, pp. 719-733.
- Lehto, M.R. with Buck and .R., Ings, D.M., "Predetermined
Time Statistics of Discrete Tasks During Dual Tasking,"
IEA/NES Conference, Oslo, Norway, August 1980, pp. 78-84.
- Lehto, M.R. with Boggs, G.J., Weiss, S.W. and Salvendy, G.,
"Computer System Response Time and Psychophysical Stress,"
IEEE Conference on Systems, Man and Cybernetics, Seattle, WA,
October 28-30, 1982, pp. 40-44.
- Lehto, M.R., "Knowledge-based Approach for Assisting
Safety/Human Factors Design," Proceedings of the 1994 NSF
Design and Manufacturing Grantees Conference, Cambridge, MA,
January 5-7, 1994, pp. 61-62.
- Foley, J.P. and Lehto, M.R., "Models of Memory: Implications
for Knowledge Acquisition," in Designing and Using Human-Computer
Interfaces and Knowledge Based Systems, Salvendy, G. and Smith,
M.J. (eds), Elsevier, Amsterdam, 1989, pp. 813-821.
- Lehto, M.R., An Investigation of Discrete Communication Tasks
Within a Dual Task Environment, M.S.I.E. Thesis, School of Industrial
Engineering, Purdue University, West Lafayette, IN, 1981.
- Lehto, M.R. and Foley, J.P., Toward Formal Applications of
Human Factors during Design, 31st Annual Meeting of the Human
Factors Society, NY, October 19-23, 1987.
Decision Making
- Miller, J.M. (1965). Capacity Concept for Improved Production
Management Decision Making. Copyrighted Masters Thesis, The Ohio
State University, Columbus, OH.
- Lehto, M.R., "Decision Making" Chapter 37 in Handbook
of Human Factors & Ergonomics, second edition Salvendy, G.
(ed), John Wiley & Sons, NY, 1997, pp. TBA.
- Lehto, M.R., Safety Decision-Making: Two Case Studies, University
of Western Australia, Western Australia, September, 1993.
Stressors
- Lehto, M.R with Weiss, S.W., Boggs, G., Shodja, S. and Martin,
D.J., "Computer System Response Time and Psychophysiological
Stress II," Proceedings of the Human Factors Society - 26th
Annual Meeting, Seattle, WA, October 25-29, 1982, pp. 698-702.
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE
Manufacturing Processes
and Job Design
Work Measurement and Methods Engineering
- Miller, J.M. (1974). "Work Measurement as a Tool in
Teaching Dental Students and Scheduling Simultaneous Patients,"
Proceedings of the American Institute of Industrial Engineers
25th Annual Conference, New Orleans.
- Miller, J.M., Hancock, W. and Foulke, J. (1973). Comparison
of MTM-1, GPD, MTM-2 and the AMAS Systems, U.S.-Canadian MTM
Association, August.
Accomodation for Disabled Workers and Operators
- Miller, J.M., Boydstun, L. and Kochlar, D. (1981). "An
Approach to Training the Disabled Driver," IEEE International
Conference on Systems, Man and Cybernetics.
- Miller, J.M., Boydstun, L. and Kochlar, D. (1981). "Simulator
Based Evaluation of Perceptually Disabled Drivers," IEEE
Transactions on Systems, Man and Cybernetics.
- Miller, J.M. with Boydstun, L. E., Kessel, D. S., (1980).
"Assessment of Perceptually Disabled Individual's Driving
Skills with a Driving Simulator," Proceedings of the Human
Factors Society 24th Annual Meeting pp. 111-113, Santa Monica,
CA: Human Factors Society.
- Miller, J.M., Boydstun and L. E. et al. (1979). "Digital
Simulation Techniques for Drivers Training and Skill Evaluation."
Proceedings of the Interagency Conference on Rehabilitation Engineering,
Atlanta.
- Miller, J.M., Boydstun, L. E., Kessel, D. S. and Hensen,
D. (1980). "Driver's Training Program: A Methodology for
Determining the Training Needs of Individuals with Perceptual
Disabilities." Proceedings of the 1980 International Conference
On Rehabilitation Engineering, Toronto.
Energy
- Lehto, M.R. with Backus, G. and Sheward, M., The Effect of
Energy Prices on the Cost of Synfuels,"Human Factors Program,
School of Industrial Engineering, Purdue University, West Lafayette,
IN, 1981.
- To Inquire on the Availability
- of Any of the Above Publications
- Please Contact
- Miller Engineering, Inc.
- Corporate Office
- 2392 Fuller Court, Ann Arbor, MI 48105
- Phone:
- (734) 662-6822
- Fax:
- (734) 747-9712
- E-Mail:
- library@millerengineering.com
- Web Site:
- www.millerengineering.come
-
- Return to PUBLICATIONS INDEX
Return to Miller Engineering
HOME PAGE